• ITAL GPU single component, moisture curing polyurethane solvent-free adhesive, specially formulated for total or partial bonding of single-ply synthetic membranes coupled with a non-woven fabric (geo-textiles) or thermal insulation panels onto horizontal substrates.

     

    PRODUCT DESCRIPTION
    Single component, moisture curing solvent-free polyurethane adhesive. Glue D4 according to DIN/EN 204/205.

     

    FIELD OF USE

    • Use outdoors or in a well ventilated area.
    • Bonding of synthetic membranes coupled with non-woven fabric (geo-textiles) and thermal insulation panels on concrete, metal, wood, insulation and other suitable substrates. ITAL GPU can be used on a wide range of media types and insulating thermal panels for example, extruded or expanded polystyrene, wool stone, fiber cement, chipboard, laminate.
    • A preliminary check is recommended to ensure the compatibility of the materials to be bonded.

     

    BEST CONDITIONS FOR USE

    • Humidity of the material to be bonded 8-20%
    • Temperature of the ambient material and glue 15-23 ° C
    • Open time at 20 ° C 20-25 min.
    • Setting time at 20 ° C at 65% humidity, 55-65 min.

     

    YIELD

    About: 100-250 g/m² depending on the material to be bonded.
    PACKAGING
    10 kg cans.

     

    SAFETY
    The product may be harmful if inhaled and could irritate the eyes, respiratory apparatus and skin. When working with temperatures above 40 ° C it may develop harmful vapors. Read the safety data sheet before use.

     

    STORAGE
    At 20°C in original closed containers, the product will keep for 9 months. storages at temperatures above 30°C and below 5°C may deteriorate the product. The product is hygroscopic and should be protected from contact with moisture.

    ITAL GPU SINGLE COMPONENT, MOISTURE CURING POLYURETHANE SOLVENT-FREE ADHESIVE

    138,60 € (ex VAT)
    ITAL GPU single component, moisture curing polyurethane solvent-free adhesive, specially formulated for total or partial bonding of single-ply synthetic membranes coupled with a non-woven fabric (geo-textiles) or thermal insulation panels onto horizontal substrates.

     

    PRODUCT DESCRIPTION
    Single component, moisture curing solvent-free polyurethane adhesive. Glue D4 according to DIN/EN 204/205.

     

    FIELD OF USE

    • Use outdoors or in a well ventilated area.
    • Bonding of synthetic membranes coupled with non-woven fabric (geo-textiles) and thermal insulation panels on concrete, metal, wood, insulation and other suitable substrates. ITAL GPU can be used on a wide range of media types and insulating thermal panels for example, extruded or expanded polystyrene, wool stone, fiber cement, chipboard, laminate.
    • A preliminary check is recommended to ensure the compatibility of the materials to be bonded.

     

    BEST CONDITIONS FOR USE

    • Humidity of the material to be bonded 8-20%
    • Temperature of the ambient material and glue 15-23 ° C
    • Open time at 20 ° C 20-25 min.
    • Setting time at 20 ° C at 65% humidity, 55-65 min.

     

    YIELD

    About: 100-250 g/m² depending on the material to be bonded.
    PACKAGING
    10 kg cans.

     

    SAFETY
    The product may be harmful if inhaled and could irritate the eyes, respiratory apparatus and skin. When working with temperatures above 40 ° C it may develop harmful vapors. Read the safety data sheet before use.

     

    STORAGE
    At 20°C in original closed containers, the product will keep for 9 months. storages at temperatures above 30°C and below 5°C may deteriorate the product. The product is hygroscopic and should be protected from contact with moisture.

  • ITAL C-PVC contact adhesive is specifically formulated for bonding PVC-P membranes without nonwoven fabric (geo-textile) to vertical supports.

     

    PRODUCT DESCRIPTION
    ITAL C-PVC is a contact adhesive based on polyurethane resins and mixtures of organic solvents, specifically designed to reduce the harmful emissions to minimum levels to the environment and the health of operators.



    USES
    • Bonding of synthetic waterproofing membranes in PVC-P without nonwoven fabric (geo-textiles) to concrete, metal, wood, insulation and other suitable substrates.
    • ITAL C-PVC adhesive is compatible with a wide range of substrates and insulating panels which are resistant to solvents, however, a preliminary check is recommended to ensure compatibility.
    YIELD
    About: 250-500 g/m² depending on the type of substrate (consumption can increase on porous concrete or wood).


    PACKAGING
    15 kg canisters.


    SAFETY
    • The product is flammable, it can be harmful if inhaled and irritate eyes, respiratory system and skin.
    • In case of contact with eyes rinse thoroughly with water.
    • If symptoms of inhalation, seek medical advice.
    • In case of fire extinguish with water or carbon foam.
    • Read the safety data sheet before use.
    STORAGE
    Store at a temperature between 5°C and 25°C in original closed packaging the product has a shelf life of 12 months. Storage at temperatures below 5°C and above 25°C and can deteriorate the product.

    ITAL C-PVC CONTACT ADHESIVE

    195,00 € (ex VAT)
    ITAL C-PVC contact adhesive is specifically formulated for bonding PVC-P membranes without nonwoven fabric (geo-textile) to vertical supports.

     

    PRODUCT DESCRIPTION
    ITAL C-PVC is a contact adhesive based on polyurethane resins and mixtures of organic solvents, specifically designed to reduce the harmful emissions to minimum levels to the environment and the health of operators.



    USES
    • Bonding of synthetic waterproofing membranes in PVC-P without nonwoven fabric (geo-textiles) to concrete, metal, wood, insulation and other suitable substrates.
    • ITAL C-PVC adhesive is compatible with a wide range of substrates and insulating panels which are resistant to solvents, however, a preliminary check is recommended to ensure compatibility.
    YIELD
    About: 250-500 g/m² depending on the type of substrate (consumption can increase on porous concrete or wood).


    PACKAGING
    15 kg canisters.


    SAFETY
    • The product is flammable, it can be harmful if inhaled and irritate eyes, respiratory system and skin.
    • In case of contact with eyes rinse thoroughly with water.
    • If symptoms of inhalation, seek medical advice.
    • In case of fire extinguish with water or carbon foam.
    • Read the safety data sheet before use.
    STORAGE
    Store at a temperature between 5°C and 25°C in original closed packaging the product has a shelf life of 12 months. Storage at temperatures below 5°C and above 25°C and can deteriorate the product.

  • ITAL C-TPO contact adhesive is specifically formulated for bonding TPO membranes without nonwoven fabric (geo-textile) to vertical supports.


    PRODUCT DESCRIPTION
    ITAL C-TPO is a contact adhesive based on polyurethane resins and mixtures of organic solvents, specifically designed to reduce the harmful emissions to minimum levels to the environment and the health of operators.


    USES
    • Bonding of synthetic waterproofing membranes in TPO without nonwoven fabric (geo-textiles) to concrete, metal, wood, insulation and other suitable substrates.
    • ITAL C-TPO adhesive is compatible with a wide range of substrates and insulating panels which are resistant to solvents, however, a preliminary check is recommended to ensure compatibility.
    YIELD

    About: 350-550 g/m² depending on the type of substrate (consumption can increase on porous concrete or wood).

    PACKAGING

    15 kg canisters.

     

    SAFETY

    • The product is flammable, it can be harmful if inhaled and irritate eyes, respiratory system and skin.
    • In case of contact with eyes rinse thoroughly with water.
    • If symptoms of inhalation, seek medical advice.
    • In case of fire extinguish with water or carbon foam. Read the safety data sheet before use.

     

    STORAGE

    Store at a temperature between 5°C and 25°C in original closed packaging the product has a shelf life of 12 months. Storage at temperatures below 5°C and above 25°C and can deteriorate the product.


    ITAL C-TPO CONTACT ADHESIVE

    201,60 € (ex VAT)
    ITAL C-TPO contact adhesive is specifically formulated for bonding TPO membranes without nonwoven fabric (geo-textile) to vertical supports.


    PRODUCT DESCRIPTION
    ITAL C-TPO is a contact adhesive based on polyurethane resins and mixtures of organic solvents, specifically designed to reduce the harmful emissions to minimum levels to the environment and the health of operators.


    USES
    • Bonding of synthetic waterproofing membranes in TPO without nonwoven fabric (geo-textiles) to concrete, metal, wood, insulation and other suitable substrates.
    • ITAL C-TPO adhesive is compatible with a wide range of substrates and insulating panels which are resistant to solvents, however, a preliminary check is recommended to ensure compatibility.
    YIELD

    About: 350-550 g/m² depending on the type of substrate (consumption can increase on porous concrete or wood).

    PACKAGING

    15 kg canisters.

     

    SAFETY

    • The product is flammable, it can be harmful if inhaled and irritate eyes, respiratory system and skin.
    • In case of contact with eyes rinse thoroughly with water.
    • If symptoms of inhalation, seek medical advice.
    • In case of fire extinguish with water or carbon foam. Read the safety data sheet before use.

     

    STORAGE

    Store at a temperature between 5°C and 25°C in original closed packaging the product has a shelf life of 12 months. Storage at temperatures below 5°C and above 25°C and can deteriorate the product.


  • PRODUCT DESCRIPTION
    For use on virtually all roofs, RoofSeal/OneStep features a UV stable backing that is available in Black, Gray, Tan and White. With the exception of surface prep, RoofSeal/One-Step is a one-step permanent repair system for virtually all roof types, and roof accessories. RoofSeal/OneStep creates a waterproof, moisture, and air tight barrier with no additional sealing required. RoofSeal/OneStep remains flexible to temperatures as low as -56°C making it virtually impossible to thermally shock the seam causing a leak. RoofSeal/OneStep bonds to a wide range of surfaces including difficult roof materials such as EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.


    BASIC USE
    RoofSeal/OneStep tape is used to seal roof joints (seams) and tears, flashings, copings, skylights, gutters, etc. Perfect for repairing and restoring roofs on mobile homes and RVs. RoofSeal/OneStep seals to itself so it can be cut and folded around an object.


    COMPOSITION
    RoofSeal/OneStep utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer. It is bonded to a UV stable backing. The adhesive coating is protected by a silicone release liner, to be removed prior to application.


    SURFACE PREPARATION
    Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

    ROOFSEAL REPAIR AND SEALING TAPE

    118,00 €177,00 € (ex VAT)
    PRODUCT DESCRIPTION
    For use on virtually all roofs, RoofSeal/OneStep features a UV stable backing that is available in Black, Gray, Tan and White. With the exception of surface prep, RoofSeal/One-Step is a one-step permanent repair system for virtually all roof types, and roof accessories. RoofSeal/OneStep creates a waterproof, moisture, and air tight barrier with no additional sealing required. RoofSeal/OneStep remains flexible to temperatures as low as -56°C making it virtually impossible to thermally shock the seam causing a leak. RoofSeal/OneStep bonds to a wide range of surfaces including difficult roof materials such as EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.


    BASIC USE
    RoofSeal/OneStep tape is used to seal roof joints (seams) and tears, flashings, copings, skylights, gutters, etc. Perfect for repairing and restoring roofs on mobile homes and RVs. RoofSeal/OneStep seals to itself so it can be cut and folded around an object.


    COMPOSITION
    RoofSeal/OneStep utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer. It is bonded to a UV stable backing. The adhesive coating is protected by a silicone release liner, to be removed prior to application.


    SURFACE PREPARATION
    Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

  • PRODUCT DESCRIPTION
    Ideal for repair and/or restorations on copper gutters, valleys, and cupolas. For use on virtually all roofs, cupolas, floors, etc. UV stable and moisture tight, CopperFlash provides an air and vapor barrier. The 1 oz. copper combined with a layer of MicroSealantTM adhesive creates a hard surface. CopperFlash will patina over time to match aged copper. CopperFlash bonds to a wide range of materials including carbon steel, aluminum, galvanized steel, aluminum foil, gypsum board, wood, rubber, tar, polyethylene, polypropylene, polystyrene, fiberglass, brick, concrete, masonry, rubber, thermoplastics, singleply roofing, etc.

     

    BASIC USE
    CopperFlash tape is designed to repair leaking seams on copper gutters and roofs, patch copper flashings, repair damaged cupolas, and bay window roofs. CopperFlash can add the beauty of copper to galvanized valley flashings, step flashing, skylight curbs, and gutters. CopperFlash seals to itself so it can be cut and folded around an object. CopperFlash can give the look of copper at a fraction of the cost.

     

    COMPOSITION
    CopperFlash utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer. It is bonded to a 1 oz. copper backing. The adhesive coating is protected by a silicone release liner, to be removed prior to application.

     

    SURFACE PREPARATION
    Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

    COPPERFLASH REPAIR AND SEALING TAPE

    44,83 €89,78 € (ex VAT)
    PRODUCT DESCRIPTION
    Ideal for repair and/or restorations on copper gutters, valleys, and cupolas. For use on virtually all roofs, cupolas, floors, etc. UV stable and moisture tight, CopperFlash provides an air and vapor barrier. The 1 oz. copper combined with a layer of MicroSealantTM adhesive creates a hard surface. CopperFlash will patina over time to match aged copper. CopperFlash bonds to a wide range of materials including carbon steel, aluminum, galvanized steel, aluminum foil, gypsum board, wood, rubber, tar, polyethylene, polypropylene, polystyrene, fiberglass, brick, concrete, masonry, rubber, thermoplastics, singleply roofing, etc.

     

    BASIC USE
    CopperFlash tape is designed to repair leaking seams on copper gutters and roofs, patch copper flashings, repair damaged cupolas, and bay window roofs. CopperFlash can add the beauty of copper to galvanized valley flashings, step flashing, skylight curbs, and gutters. CopperFlash seals to itself so it can be cut and folded around an object. CopperFlash can give the look of copper at a fraction of the cost.

     

    COMPOSITION
    CopperFlash utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer. It is bonded to a 1 oz. copper backing. The adhesive coating is protected by a silicone release liner, to be removed prior to application.

     

    SURFACE PREPARATION
    Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

  • PRODUCT DESCRIPTION
    For use on virtually all roofs, walls, floors, gravity tanks, troughs, etc. UV stable and moisture tight, AlumiBond creates an air and vapor barrier. The thick 4 mil aluminum backing combined with an advanced MicroSealantTM creates a hard surface. AlumiBond bonds to a wide range of materials including carbon steel, aluminum, galvanized steel, aluminum foil, gypsum board, wood, rubber, tar, polyethylene, polypropylene, polystyrene, fiberglass, brick, concrete, masonry, rubber, thermoplastics, singleply roofing, etc. AlumiBond remains flexible to temperatures as low as -56°C making it virtually impossible to thermally shock the roof causing a leak. Duct Sealing Tape AlumiBond is a high grade aluminum foil with a hybrid Sealant. Fuses to rigid ductwork. Will never harden, crack or peel and fall off like other duct sealing products. Lasts as long as the ductwork!

     

    BASIC USE
    AlumiBond tape is designed for use on metal buildings, trailer/RV roofs and sides, drain pans, drain pipes, duct-work, boats, canoes, and as a protective coating for surfaces where abrasion and corrosion resistance is required. AlumiBond seals to itself so it can be cut and folded around an object.


    COMPOSITION
    AlumiBond utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer. It is bonded to a 4-mil aluminum metal backing.The adhesive coating is protected by a silicone release liner, to be removed prior to application.

     

    SURFACE PREPARATION
    Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

    ALUMIBOND ALUMINIUM REPAIR AND SEALING TAPE

    58,13 €89,78 € (ex VAT)
    PRODUCT DESCRIPTION
    For use on virtually all roofs, walls, floors, gravity tanks, troughs, etc. UV stable and moisture tight, AlumiBond creates an air and vapor barrier. The thick 4 mil aluminum backing combined with an advanced MicroSealantTM creates a hard surface. AlumiBond bonds to a wide range of materials including carbon steel, aluminum, galvanized steel, aluminum foil, gypsum board, wood, rubber, tar, polyethylene, polypropylene, polystyrene, fiberglass, brick, concrete, masonry, rubber, thermoplastics, singleply roofing, etc. AlumiBond remains flexible to temperatures as low as -56°C making it virtually impossible to thermally shock the roof causing a leak. Duct Sealing Tape AlumiBond is a high grade aluminum foil with a hybrid Sealant. Fuses to rigid ductwork. Will never harden, crack or peel and fall off like other duct sealing products. Lasts as long as the ductwork!

     

    BASIC USE
    AlumiBond tape is designed for use on metal buildings, trailer/RV roofs and sides, drain pans, drain pipes, duct-work, boats, canoes, and as a protective coating for surfaces where abrasion and corrosion resistance is required. AlumiBond seals to itself so it can be cut and folded around an object.


    COMPOSITION
    AlumiBond utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer. It is bonded to a 4-mil aluminum metal backing.The adhesive coating is protected by a silicone release liner, to be removed prior to application.

     

    SURFACE PREPARATION
    Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

  • PRODUCT DESCRIPTION
    DoubleStick is pure an advanced MicroSealantTM with a removable siliconized release liner on each side. Designed to bond two surfaces, even two surfaces made of two or more dissimilar materials. DoubleStick creates a tight, permanent, waterproof seal. DoubleStick remains flexible to temperatures as low as -56°C making it virtually impossible to thermally shock the seal causing a leak. DoubleStick bonds to a wide range of surfaces including EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminum and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB board, shielding membranes, etc.

     

    BASIC USE
    DoubleStick tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces, and/or creates a weather proof, permanent bond between two or more similar or dissimilar surfaces. Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of MicroSealantTM to form a gasket, seal a gap or seal, or as needed.

     

    COMPOSITION
    DoubleSeal utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer, between two silicone release liners.

     

    SURFACE PREPARATION
    Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

    DOUBLESTICK DOUBLE SIDED TAPE

    45,89 €71,63 € (ex VAT)
    PRODUCT DESCRIPTION
    DoubleStick is pure an advanced MicroSealantTM with a removable siliconized release liner on each side. Designed to bond two surfaces, even two surfaces made of two or more dissimilar materials. DoubleStick creates a tight, permanent, waterproof seal. DoubleStick remains flexible to temperatures as low as -56°C making it virtually impossible to thermally shock the seal causing a leak. DoubleStick bonds to a wide range of surfaces including EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminum and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB board, shielding membranes, etc.

     

    BASIC USE
    DoubleStick tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces, and/or creates a weather proof, permanent bond between two or more similar or dissimilar surfaces. Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of MicroSealantTM to form a gasket, seal a gap or seal, or as needed.

     

    COMPOSITION
    DoubleSeal utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer, between two silicone release liners.

     

    SURFACE PREPARATION
    Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

  • PRODUCT DESCRIPTION
    Universal Prime is a specially formulated primer developed specifically for repair and sealing tapes. Universal Prime, based on a VOC exempt solvent, meets all federal standards for health and environmental safety. Universal Prime is designed to work with all repair and sealing tapes and was specifically developed for preparation of surfaces when installing repair and sealing tapes in low ambiant temperatures from 4°C down to -29°. It is also widely used as a coalescing agent on surfaces which have difficult to remove dirt or conditions which may encapsulate the repair and sealing tapes.
    *Do not use on PVC.

     

    BASIC USE
    Universal Prime is used to prepare surfaces for application of all repair and sealing tapes. Recommended uses include, but are not limited to dirty surfaces which are difficult to clean completely (tar and gravel), potentially loose surfaces (mortar), porous surfaces (wood or concrete), and anytime the repair and sealing tapes is applied at temperatures below 4°C ambient.

     

    COMPOSITION
    Universal Prime is based on a VOC exempt solvent with a blend of our elastomers and resins infused into the solvent.

     

    PRODUCT INFORMATION
    Technical Data Application temperature -29°C to 96°C Coverage 28 m2 per 3,76 lt. Drying time at 15°C 15 minutes. Film thickness 0,03-0,1 mm. when wet. Flash point 43°C. Values are typical performance properties and characteristics based on laboratory testing. This is intended as a guide for comparison purposes and does not constitute a specification or specification range.


    SURFACE PREPARATION
    Surface must be clean and dry. Remove heavy accumulations of loose rust and scale, dust, talc, and dirt. Oil and grease, and other contaminants should be removed with a non-residue cleaner. Do not use Universal Prime on PVC roofs as reactivation of some plasticizers may occur.

    UNIVERSAL PRIME PRIMER

    88,60 € (ex VAT)
    PRODUCT DESCRIPTION
    Universal Prime is a specially formulated primer developed specifically for repair and sealing tapes. Universal Prime, based on a VOC exempt solvent, meets all federal standards for health and environmental safety. Universal Prime is designed to work with all repair and sealing tapes and was specifically developed for preparation of surfaces when installing repair and sealing tapes in low ambiant temperatures from 4°C down to -29°. It is also widely used as a coalescing agent on surfaces which have difficult to remove dirt or conditions which may encapsulate the repair and sealing tapes.
    *Do not use on PVC.

     

    BASIC USE
    Universal Prime is used to prepare surfaces for application of all repair and sealing tapes. Recommended uses include, but are not limited to dirty surfaces which are difficult to clean completely (tar and gravel), potentially loose surfaces (mortar), porous surfaces (wood or concrete), and anytime the repair and sealing tapes is applied at temperatures below 4°C ambient.

     

    COMPOSITION
    Universal Prime is based on a VOC exempt solvent with a blend of our elastomers and resins infused into the solvent.

     

    PRODUCT INFORMATION
    Technical Data Application temperature -29°C to 96°C Coverage 28 m2 per 3,76 lt. Drying time at 15°C 15 minutes. Film thickness 0,03-0,1 mm. when wet. Flash point 43°C. Values are typical performance properties and characteristics based on laboratory testing. This is intended as a guide for comparison purposes and does not constitute a specification or specification range.


    SURFACE PREPARATION
    Surface must be clean and dry. Remove heavy accumulations of loose rust and scale, dust, talc, and dirt. Oil and grease, and other contaminants should be removed with a non-residue cleaner. Do not use Universal Prime on PVC roofs as reactivation of some plasticizers may occur.

  • The new predrilled BAR is designed to allow mechanical fastening of waterproofing membranes to the support, it ensures the optimum distribution of force of the fasteners over the full length of the bar thus offering greater mechanical resistance to traction of membranes or wind force. The material used for the realization of the predrilled bar is galvanized steel which provides a prolonged resistance to corrosion.

    FIXING BAR FOR WATERPROOFING MEMBRANES

    102,00 € (ex VAT)
    The new predrilled BAR is designed to allow mechanical fastening of waterproofing membranes to the support, it ensures the optimum distribution of force of the fasteners over the full length of the bar thus offering greater mechanical resistance to traction of membranes or wind force. The material used for the realization of the predrilled bar is galvanized steel which provides a prolonged resistance to corrosion.

  • The DISCS shown ease the application of PVC-P, ECB or TPO membranes in difficult areas such as tunnels, foundations etc, whatever the application angle. The discs are fastened to the surface without predrilling using a compressed air nail gun. The discs are used to fasten diffusion/protection material such as non-woven geo-textile or similar, and as anchoring point for PVC-P or ECB or TPO membrane which are subsequently attached using a hot air hand gun (Art. 401).

    FIXING DISCS IN PVC-P, ECP AND TPO FOR INSTALLING WATERPROOFING MEMBRANES IN TUNNES, FOUNDATIONS ETC.

    78,00 €96,00 € (ex VAT)
    The DISCS shown ease the application of PVC-P, ECB or TPO membranes in difficult areas such as tunnels, foundations etc, whatever the application angle. The discs are fastened to the surface without predrilling using a compressed air nail gun. The discs are used to fasten diffusion/protection material such as non-woven geo-textile or similar, and as anchoring point for PVC-P or ECB or TPO membrane which are subsequently attached using a hot air hand gun (Art. 401).

  • The PRESSURE PLUGS for insulation boards of various types must be used on substrates of concrete or solid bricks. They are produced in impact-resistant polypropylene to ensure a sound hold, durability and use with low temperatures.

     

    The ETAG 014 certified EXPANSION ANCHORS for fixing insulation boards of various types can be used on concrete and solid or perforated bricks. The plug is manufactured in anti-shock polypropylene while the nail is made from high impact polystyrene to ensure the complete expansion of the plug.

    ANCHORS FOR FIXING INSULATION BOARDS

    32,40 €103,40 € (ex VAT)
    The PRESSURE PLUGS for insulation boards of various types must be used on substrates of concrete or solid bricks. They are produced in impact-resistant polypropylene to ensure a sound hold, durability and use with low temperatures.

     

    The ETAG 014 certified EXPANSION ANCHORS for fixing insulation boards of various types can be used on concrete and solid or perforated bricks. The plug is manufactured in anti-shock polypropylene while the nail is made from high impact polystyrene to ensure the complete expansion of the plug.

  • ANTI-NESTING COMB Art. 2002 – 2003 and 2004 suitable for discontinuous roofs, for example, concrete or clay tiles, cement or fibre-cement roofing sheets. They help ventilate the roof and also avoid birds nesting.

    WASHERS, SCREWS, PLUGS, NAILS, ANTI-NESTING COMB

    21,00 €240,00 € (ex VAT)
    ANTI-NESTING COMB Art. 2002 – 2003 and 2004 suitable for discontinuous roofs, for example, concrete or clay tiles, cement or fibre-cement roofing sheets. They help ventilate the roof and also avoid birds nesting.