• “UNIVERSAL” ANTI-BACKUP ROOF DRAIN IN IGOM.CE is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multipitched roofs and industrial buildings. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITAL PROFILI® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan.
    The drain consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane. The stem piece of the unit has two or more strategically placed circular ribs which face outwards and when forced into the drain pipe prevent backing-up of water forming a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit they guarantee optimal seal with any type of pipe.
    Thanks to the presence of the external seal rings the passage of water vapour or back-up of water into the roofing system is prevented. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing.

    “UNIVERSAL” ANTI-BACKUP ROOF DRAINS IN IGOM.CE

    209,20 €487,80 € (ex VAT)
    “UNIVERSAL” ANTI-BACKUP ROOF DRAIN IN IGOM.CE is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multipitched roofs and industrial buildings. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITAL PROFILI® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan.
    The drain consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane. The stem piece of the unit has two or more strategically placed circular ribs which face outwards and when forced into the drain pipe prevent backing-up of water forming a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit they guarantee optimal seal with any type of pipe.
    Thanks to the presence of the external seal rings the passage of water vapour or back-up of water into the roofing system is prevented. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing.

  • EXTRALONG ROOF DRAIN IN IGOM.CE ANTI-BACKUP ROOF DRAIN is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs and industrial buildings. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane. The 485 mm high stem allows for use with thicker substrates thus avoiding the need for any intermediate joints and when inserted into the spigot of down pipe permits a constant and continues flow without losing any of the capacity of the downpipe, it can also be fixed into position previous to installation of the downpipes. Furthermore, this part of the stem has two or more strategically placed circular ribs which face outwards and when forced into the spigot prevent backing-up of water forming a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit they guarantee optimal seal with any type of pipe. Thanks to the presence of the external seal rings the passage of water vapour or back-up of water into the roofing system is prevented. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing.

    “EXTRALONG” ANTI-BACKUP ROOF DRAIN IN IGOM.CE

    457,00 €562,50 € (ex VAT)
    EXTRALONG ROOF DRAIN IN IGOM.CE ANTI-BACKUP ROOF DRAIN is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs and industrial buildings. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane. The 485 mm high stem allows for use with thicker substrates thus avoiding the need for any intermediate joints and when inserted into the spigot of down pipe permits a constant and continues flow without losing any of the capacity of the downpipe, it can also be fixed into position previous to installation of the downpipes. Furthermore, this part of the stem has two or more strategically placed circular ribs which face outwards and when forced into the spigot prevent backing-up of water forming a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit they guarantee optimal seal with any type of pipe. Thanks to the presence of the external seal rings the passage of water vapour or back-up of water into the roofing system is prevented. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing.

  • “UNIVERSAL R” ANTI-BACKUP ROOF DRAIN IN IGOM.CE WITH MESHED FLANGE is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs and industrial buildings. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings, liquid cements polyurethane resins, and two-component waterproofing products. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan.
    The drain consists of a truncated body available in various diameters solidly attached to the a 5x5mm meshed flange all made from the same materials to increase the adhesion of the waterproofing products. The stem piece of the unit has two or more strategically placed circular ribs which face outwards and when forced into the drain pipe prevent backing-up and form a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit they guarantee optimal seal with any type of pipe. Thanks to the presence of the external seal rings the passage of water vapour or back-up of water into the roofing system is prevented. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing.

    “UNIVERSAL R” ANTI-BACKUP ROOF DRAIN IN IGOM.CE

    160,00 €240,00 € (ex VAT)
    “UNIVERSAL R” ANTI-BACKUP ROOF DRAIN IN IGOM.CE WITH MESHED FLANGE is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs and industrial buildings. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings, liquid cements polyurethane resins, and two-component waterproofing products. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan.
    The drain consists of a truncated body available in various diameters solidly attached to the a 5x5mm meshed flange all made from the same materials to increase the adhesion of the waterproofing products. The stem piece of the unit has two or more strategically placed circular ribs which face outwards and when forced into the drain pipe prevent backing-up and form a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit they guarantee optimal seal with any type of pipe. Thanks to the presence of the external seal rings the passage of water vapour or back-up of water into the roofing system is prevented. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing.

  • “NUOVA” ANTI-BACKUP ROOF DRAIN IN IGOM.CE is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multipitched roofs and industrial buildings. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics, in fact, it has a 170 mm diameter by 30 mm deep head which increases the drainage capacity up to 45% compared to a standard drain. The total funnel length of 330 mm allows for use with thicker substrates thus avoiding the need for any intermediate joints and when inserted into the spigot of down pipe permits a constant and continues flow without losing any of the capacity of the downpipe, it can also be fixed into position previous to installation of the downpipes. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® allow us to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide range of temperatures as it is extremely flexible at low temperatures, it is also stable over time thanks to its physical and mechanical properties which therefore assure maximum performance throughout its lifespan. It has been proved that this roof drain can discharge up to 45% more than a normal drain of the same diameter. The drain consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane. The stem piece of the unit has two or more strategically placed circular rings which face outwards and when forced into the drain pipe form a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit, they guarantee optimal seal with any type of pipe and prevent the passage of water vapour or back-up of water into the roofing system. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing. It is highly recommended to use the 200 mm diameter gravel grate directly connected to the slotted ring, the ring ha three slots which allow for the regulation of the height in case of layer variations in the waterproofing system.

    “NUOVA” ANTI-BACKUP ROOF DRAIN IN IGOM.EE

    244,80 €365,00 € (ex VAT)
    “NUOVA” ANTI-BACKUP ROOF DRAIN IN IGOM.CE is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multipitched roofs and industrial buildings. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics, in fact, it has a 170 mm diameter by 30 mm deep head which increases the drainage capacity up to 45% compared to a standard drain. The total funnel length of 330 mm allows for use with thicker substrates thus avoiding the need for any intermediate joints and when inserted into the spigot of down pipe permits a constant and continues flow without losing any of the capacity of the downpipe, it can also be fixed into position previous to installation of the downpipes. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® allow us to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide range of temperatures as it is extremely flexible at low temperatures, it is also stable over time thanks to its physical and mechanical properties which therefore assure maximum performance throughout its lifespan. It has been proved that this roof drain can discharge up to 45% more than a normal drain of the same diameter. The drain consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane. The stem piece of the unit has two or more strategically placed circular rings which face outwards and when forced into the drain pipe form a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit, they guarantee optimal seal with any type of pipe and prevent the passage of water vapour or back-up of water into the roofing system. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing. It is highly recommended to use the 200 mm diameter gravel grate directly connected to the slotted ring, the ring ha three slots which allow for the regulation of the height in case of layer variations in the waterproofing system.

      • ART. 26 Leaf grate suitable for roof drains  Ø mm.  75 – 125 
        LEAF GRATE is suitable for roof drains with diameters from 75 mm to 125 mm, it is made from thermoplastic material and is resistant to degradation caused by the sun, ozone and other atmospheric and chemical agents. The attachment to the roof drain is optimized by the small hooks present on the inserts of the leaf grate.
      • ART. 24 Leaf and gravel grate suitable for roof drains Ø mm. 60 – 160
        LEAF AND GRAVEL GRATES are suitable for roof drains from 60 mm to 160 mm in diameter. It has an internal thread into which Art. 24.1 is screwed. Art. 24 and 24.1 are made from thermoplastic materials which are resistant to degradation caused by sun, ozone and other atmospheric and chemical agents.
      • ART. 24.1 FIXING PIECE
        The FIXING PIECE Art. 24.1 must be inserted into the roof drain, when necessary and in particular with smaller diameters, cut the anchoring tabs to suit the diameter the tabs should fit tightly and not bend.
    • ART. 24.2 Leaf and gravel grate suitable for roof drains Ø mm. 60 – 200
      LEAF AND GRAVEL GRATES are suitable for roof drains from 60 A mm to 200 mm in diameter. It has an internal threaded centre piece of the same height as the leaf/gravel grate its self into which Art. 24.1 is screwed. Art. 24.2 and 24.1 are made from thermoplastic materials which are resistant to degradation caused by sun, ozone and other atmospheric and chemical agents.

    LEAF AND GRAVEL GRATES

    0,30 €207,00 € (ex VAT)
      • ART. 26 Leaf grate suitable for roof drains  Ø mm.  75 – 125 
        LEAF GRATE is suitable for roof drains with diameters from 75 mm to 125 mm, it is made from thermoplastic material and is resistant to degradation caused by the sun, ozone and other atmospheric and chemical agents. The attachment to the roof drain is optimized by the small hooks present on the inserts of the leaf grate.
      • ART. 24 Leaf and gravel grate suitable for roof drains Ø mm. 60 – 160
        LEAF AND GRAVEL GRATES are suitable for roof drains from 60 mm to 160 mm in diameter. It has an internal thread into which Art. 24.1 is screwed. Art. 24 and 24.1 are made from thermoplastic materials which are resistant to degradation caused by sun, ozone and other atmospheric and chemical agents.
      • ART. 24.1 FIXING PIECE
        The FIXING PIECE Art. 24.1 must be inserted into the roof drain, when necessary and in particular with smaller diameters, cut the anchoring tabs to suit the diameter the tabs should fit tightly and not bend.
    • ART. 24.2 Leaf and gravel grate suitable for roof drains Ø mm. 60 – 200
      LEAF AND GRAVEL GRATES are suitable for roof drains from 60 A mm to 200 mm in diameter. It has an internal threaded centre piece of the same height as the leaf/gravel grate its self into which Art. 24.1 is screwed. Art. 24.2 and 24.1 are made from thermoplastic materials which are resistant to degradation caused by sun, ozone and other atmospheric and chemical agents.

      • 90° ANGLED ROOF DRAIN IN IGOM.EE WITH ROUND PIPE
        Art. 304, 305, 306, 307, 310, 311, 312

        The 90° ANGLED ROOF DRAIN IN IGOM.EE WITH ROUND PIPE is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.EE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties. IGOM.EE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and it is stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various diameters solidly attached to the perimeter slotted and embossed upper surface flange area all made from the same materials to facilitate adhesion of the membrane. The angled roof drain with a round pipe as a main characteristic offers the possibility of being used for direct discharge from terraces without being connected to down pipes, it can be used with internal or external down pipes but in particular it can be used horizontally on all types of projects were thicker walls are present. It can also be used in conjunction with fittings and curves with secure seal gaskets and for this reason the connections can be made on the inside of walls or very close to the wall. It can be used in conjunction with the following curves and gaskets: – Art. 310 curved fitting Art. 315 – 320 or with other curved fittings that respect UNI EN 1451-1.
      • ANGLED ROOF DRAIN IN IGOM.EE
        Art. 117

        The 90° ANGLED ROOF DRAIN IN IGOM.EE is particularly suitable for balconies as direct overflows without downpipes, its large flange allows for an optimal connection with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. Made in IGOM.EE. The Art. 118.5 allows for an ample flow and at the same time adds a perfect finish as well as acting as a support for eventual skirting. The fitting can be cut to suit the thickness of each individual pavement.
    • ANGLED ROOF DRAIN WITH SQUARE PIPE, RECTANGULAR IN IGOM.EE.
      Art. 39, 39.2, 45

      The 90° ANGLED ROOF DRAIN WITH SQUARE PIPE, RECTANGULAR IN IGOM.EE is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM. EE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties. IGOM.EE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and it is stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various shapes solidly attached to the perimeter slotted and embossed upper surface flange area all made from the same materials to facilitate adhesion of the membrane. The angled roof drain with a round pipe as a main characteristic offers the possibility of being used for direct discharge from terraces without being connected to down pipes, it can be used with internal or external down pipes but in particular it can be used horizontally on all types of projects were thicker walls are present.

    ANGLED ROOF DRAINS IN IGOM.EE

    2,12 €447,60 € (ex VAT)
      • 90° ANGLED ROOF DRAIN IN IGOM.EE WITH ROUND PIPE
        Art. 304, 305, 306, 307, 310, 311, 312

        The 90° ANGLED ROOF DRAIN IN IGOM.EE WITH ROUND PIPE is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.EE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties. IGOM.EE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and it is stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various diameters solidly attached to the perimeter slotted and embossed upper surface flange area all made from the same materials to facilitate adhesion of the membrane. The angled roof drain with a round pipe as a main characteristic offers the possibility of being used for direct discharge from terraces without being connected to down pipes, it can be used with internal or external down pipes but in particular it can be used horizontally on all types of projects were thicker walls are present. It can also be used in conjunction with fittings and curves with secure seal gaskets and for this reason the connections can be made on the inside of walls or very close to the wall. It can be used in conjunction with the following curves and gaskets: – Art. 310 curved fitting Art. 315 – 320 or with other curved fittings that respect UNI EN 1451-1.
      • ANGLED ROOF DRAIN IN IGOM.EE
        Art. 117

        The 90° ANGLED ROOF DRAIN IN IGOM.EE is particularly suitable for balconies as direct overflows without downpipes, its large flange allows for an optimal connection with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. Made in IGOM.EE. The Art. 118.5 allows for an ample flow and at the same time adds a perfect finish as well as acting as a support for eventual skirting. The fitting can be cut to suit the thickness of each individual pavement.
    • ANGLED ROOF DRAIN WITH SQUARE PIPE, RECTANGULAR IN IGOM.EE.
      Art. 39, 39.2, 45

      The 90° ANGLED ROOF DRAIN WITH SQUARE PIPE, RECTANGULAR IN IGOM.EE is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM. EE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties. IGOM.EE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and it is stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various shapes solidly attached to the perimeter slotted and embossed upper surface flange area all made from the same materials to facilitate adhesion of the membrane. The angled roof drain with a round pipe as a main characteristic offers the possibility of being used for direct discharge from terraces without being connected to down pipes, it can be used with internal or external down pipes but in particular it can be used horizontally on all types of projects were thicker walls are present.

  • CURVES, CONNECTIONS, HOPPER

    3,70 €273,84 € (ex VAT)

  • The DRAIN AND SIPHON UNITS WITH LATERAL DISCHARGER IN IGOM.EE are excellent for connections between the waterproofing materials and the down pipes themselves. It is suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.EE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties. IGOM.EE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and it is stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drains consist of a cylindrical body with a lateral discharge pipe attached to a ribbed flange all made from the same materials to facilitate adhesion of the membrane. They are fitted with an adjustable bellows system for use with various thicknesses of paving materials and are available with ABS or stainless steel grilles. The siphon type drains are fitted with a plug for easy cleaning of deposits and can either be welded or sleeve fitted to curves and pipes with gaskets according to UNI EN 1451-1. They are suitable for use on flat roofs, patios, bathrooms, garages, laundry rooms etc.
    NOTE: Siphon drain units should not be used in areas where freezing is likely to occur.

    DRAIN AND SIPHON UNITS WITH LATERAL DISCHARGER IN IGOM.EE

    2,12 €171,36 € (ex VAT)
    The DRAIN AND SIPHON UNITS WITH LATERAL DISCHARGER IN IGOM.EE are excellent for connections between the waterproofing materials and the down pipes themselves. It is suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.EE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties. IGOM.EE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and it is stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drains consist of a cylindrical body with a lateral discharge pipe attached to a ribbed flange all made from the same materials to facilitate adhesion of the membrane. They are fitted with an adjustable bellows system for use with various thicknesses of paving materials and are available with ABS or stainless steel grilles. The siphon type drains are fitted with a plug for easy cleaning of deposits and can either be welded or sleeve fitted to curves and pipes with gaskets according to UNI EN 1451-1. They are suitable for use on flat roofs, patios, bathrooms, garages, laundry rooms etc.
    NOTE: Siphon drain units should not be used in areas where freezing is likely to occur.

  • The AIR VENTS/VAPOUR EXTRACTORS IN IGOM.EE are particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details in fact, the unit has optimal characteristics that help eliminate serious and typical problems that can appear on a waterproofed roof caused by an imperfect evacuation of vapours, imperfect ventilation or use of incorrect air vents/vapour extractors: swelling of the membrane, moistening of the insulating layer causing a subsequent reduction or loss of original properties. The Air Vents/Vapour Extractors is made from IGOM.EE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties. IGOM.EE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and it is stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The Air vents/Vapour extractors consist of a protruding element, available in various diameters and heights, solidly attached to a perimeter slotted and ribbed upper surface flange. The Air Vents /Vapour Extractors designed and patented by ITALPROFILI ® are one of the most effective ventilation systems as they allow for the total evacuation of vapour build-up under the waterproofing layer.

    AIR VENTS/VAPOUR EXTRACTORS IN IGOM.EE

    0,69 €412,00 € (ex VAT)
    The AIR VENTS/VAPOUR EXTRACTORS IN IGOM.EE are particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details in fact, the unit has optimal characteristics that help eliminate serious and typical problems that can appear on a waterproofed roof caused by an imperfect evacuation of vapours, imperfect ventilation or use of incorrect air vents/vapour extractors: swelling of the membrane, moistening of the insulating layer causing a subsequent reduction or loss of original properties. The Air Vents/Vapour Extractors is made from IGOM.EE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties. IGOM.EE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and it is stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The Air vents/Vapour extractors consist of a protruding element, available in various diameters and heights, solidly attached to a perimeter slotted and ribbed upper surface flange. The Air Vents /Vapour Extractors designed and patented by ITALPROFILI ® are one of the most effective ventilation systems as they allow for the total evacuation of vapour build-up under the waterproofing layer.

  • The ANTI-CONDENSE EXTRACTOR is suited for bathrooms, kitchens, wet rooms and any other areas where there is a heavy presence of vapour. Because of constructive characteristics it avoids the formation of condense and thus avoids dripping along ventilation pipes. They have been designed to cover protruding pipes and can also be used on flat roofs together with pipe fitting Art. 58, on slopped roofs with traditional tiles together with Art. 60. They are available in colours grey or brown.
    The FLEXIBLE COLLAR  is suitable for connecting protruding pipes with the waterproofing membrane and can be used with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The flexible collar consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane.

    ANTI-CONDENSE EXTRACTOR, FLEXIBLE COLLAR

    220,00 €616,50 € (ex VAT)
    The ANTI-CONDENSE EXTRACTOR is suited for bathrooms, kitchens, wet rooms and any other areas where there is a heavy presence of vapour. Because of constructive characteristics it avoids the formation of condense and thus avoids dripping along ventilation pipes. They have been designed to cover protruding pipes and can also be used on flat roofs together with pipe fitting Art. 58, on slopped roofs with traditional tiles together with Art. 60. They are available in colours grey or brown.
    The FLEXIBLE COLLAR  is suitable for connecting protruding pipes with the waterproofing membrane and can be used with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The flexible collar consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane.

  • PIPE WRAP/FITTINGS IN IGOM.CE are suitable for connecting protruding pipes with the waterproofing membrane and can be used with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane.

    PIPE WRAP/FITTINGS IN IGOM.CE

    208,00 €258,00 € (ex VAT)
    PIPE WRAP/FITTINGS IN IGOM.CE are suitable for connecting protruding pipes with the waterproofing membrane and can be used with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that allow to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various diameters solidly attached to the ribbed flange area all made from the same materials to facilitate adhesion of the membrane.

  • INTERNAL AND EXTERNAL CORNERS IN IGOM.CE are suitable for the reinforcement of the waterproofing in internal and external corners. The above elements should not be used as a substitute of the original waterproofing product, they have been created for a secondary protection and reinforcement of those areas of higher risk because of transversal and horizontal traction of the waterproofing membrane. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. These items are made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that permit to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan.

    INTERNAL AND EXTERNAL CORNERS IN IGOM.CE

    110,00 €130,00 € (ex VAT)
    INTERNAL AND EXTERNAL CORNERS IN IGOM.CE are suitable for the reinforcement of the waterproofing in internal and external corners. The above elements should not be used as a substitute of the original waterproofing product, they have been created for a secondary protection and reinforcement of those areas of higher risk because of transversal and horizontal traction of the waterproofing membrane. It is particularly suitable for use with all kinds of APP, SBS modified bituminous membranes as well as liquid bitumen coatings. These items are made from IGOM.CE, a specially formulated compound of synthetic rubbers realized by ITALPROFILI ® that permit to obtain high physical, chemical and technical properties as well as a flexible product. IGOM.CE is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range as it is extremely flexible at low temperatures and stable over time thanks to its physical and mechanical properties, which therefore assure maximum performance throughout its lifespan.