• The ROOF DRAIN IN PVC-P is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs and industrial buildings. It is used for application on roofs waterproofed with PVC-P membranes. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various diameters solidly attached to a smooth flange. The stem piece of the unit has two or more strategically placed circular ribs which face outwards which when forced into the drain pipe prevent backing-up of water forming a perfect seal. The seal rings are compressed upwards when inserted into the downpipe guaranteeing an optimal seal with any type of pipe. The presence of the external seal rings avoid the passage of water vapour or back-up water into the roofing build-up, this is particularly important where insulation is involved as it could compromise the insulation, factor that constitutes one of the main problems in roof waterproofing.

    ANTI-BACKUP ROOF DRAIN IN PVC-P

    213,00 €288,00 € (ex VAT)
    The ROOF DRAIN IN PVC-P is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs and industrial buildings. It is used for application on roofs waterproofed with PVC-P membranes. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drain consists of a truncated body available in various diameters solidly attached to a smooth flange. The stem piece of the unit has two or more strategically placed circular ribs which face outwards which when forced into the drain pipe prevent backing-up of water forming a perfect seal. The seal rings are compressed upwards when inserted into the downpipe guaranteeing an optimal seal with any type of pipe. The presence of the external seal rings avoid the passage of water vapour or back-up water into the roofing build-up, this is particularly important where insulation is involved as it could compromise the insulation, factor that constitutes one of the main problems in roof waterproofing.

  • The “NUOVA” ANTI-BACKUP ROOF DRAIN IN PVC-P is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multipitched roofs and industrial buildings. It is used for application on roofs waterproofed with PVC-P membrane. This particular item has been studied right down to its smallest details so as to optimize its characteristics, in fact, it has a 170×30 mm diameter deep head which increases the drainage capacity up to 45% compared to a standard drain. The total funnel length of 330 mm allows for use with thicker substrates thus avoiding the need for any intermediate joints and when inserted into the spigot of down pipe permits a constant and continues flow without losing any of the capacity of the downpipe, it can also be fixed into position previous to installation of the downpipes. The drain is made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. It has been proved that this roof drain can discharge up to 45% more than a normal drain of the same diameter. The drain consists of a truncated body available in various diameters solidly attached to a smooth flange. The stem piece of the unit has two or more strategically placed circular rings which face outwards and when forced into the drain pipe form a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit, they guarantee optimal seal with any type of pipe and prevent the passage of water vapour or backup of water into the roofing system. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing. It is highly recommended to use the 200 mm diameter gravel grate directly connected to the slotted ring, the ring ha three slots which allow for the regulation of the height in case of layer variations in the waterproofing system.

    “NUOVA” ANTI-BACKUP ROOF DRAIN IN PVC-P

    244,80 €365,00 € (ex VAT)
    The “NUOVA” ANTI-BACKUP ROOF DRAIN IN PVC-P is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multipitched roofs and industrial buildings. It is used for application on roofs waterproofed with PVC-P membrane. This particular item has been studied right down to its smallest details so as to optimize its characteristics, in fact, it has a 170×30 mm diameter deep head which increases the drainage capacity up to 45% compared to a standard drain. The total funnel length of 330 mm allows for use with thicker substrates thus avoiding the need for any intermediate joints and when inserted into the spigot of down pipe permits a constant and continues flow without losing any of the capacity of the downpipe, it can also be fixed into position previous to installation of the downpipes. The drain is made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. It has been proved that this roof drain can discharge up to 45% more than a normal drain of the same diameter. The drain consists of a truncated body available in various diameters solidly attached to a smooth flange. The stem piece of the unit has two or more strategically placed circular rings which face outwards and when forced into the drain pipe form a perfect seal. The seal rings are compressed upwards when inserted into the downpipe and thanks to this pressure fit, they guarantee optimal seal with any type of pipe and prevent the passage of water vapour or backup of water into the roofing system. This is particularly important where insulation is involved as it could compromise the insulation its self, factor that constitutes one of the main problems in roof waterproofing. It is highly recommended to use the 200 mm diameter gravel grate directly connected to the slotted ring, the ring ha three slots which allow for the regulation of the height in case of layer variations in the waterproofing system.

  • 90° PVC-P ANGLED ROOF DRAIN IN PVC-P, RECTANGULAR, SQUARE AND ROUND is particularly suitable for use with all kinds of synthetic PVC-P waterproofing membranes. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The 90° roof drains are made from a flexible and UV stabilized PVC-P. They offer high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drains are consists of a truncated body in various shapes solidly attached to a large and smooth 90° flange. The 90° angled roof drain offers the possibility of being used for direct discharge from terraces without being connected to down pipes, they also can be used with internal or external down pipes but in particular it can be used horizontally on all types of projects were thicker walls are present.

    ANGLED ROOF DRAINS IN PVC-P

    114,70 €268,50 € (ex VAT)
    90° PVC-P ANGLED ROOF DRAIN IN PVC-P, RECTANGULAR, SQUARE AND ROUND is particularly suitable for use with all kinds of synthetic PVC-P waterproofing membranes. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The 90° roof drains are made from a flexible and UV stabilized PVC-P. They offer high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The drains are consists of a truncated body in various shapes solidly attached to a large and smooth 90° flange. The 90° angled roof drain offers the possibility of being used for direct discharge from terraces without being connected to down pipes, they also can be used with internal or external down pipes but in particular it can be used horizontally on all types of projects were thicker walls are present.

  • CURVES, CONNECTIONS, HOPPER


  • The AIR VENTS/VAPOUR EXTRACTORS IN PVC-P are particularly suitable for use with PVC-P waterproofing membranes. This particular item has been studied right down to its smallest details in fact, the unit has optimal characteristics that help eliminate serious and typical problems that can appear on a waterproofed roof caused by an imperfect evacuation of vapours, imperfect ventilation or use of incorrect air vents/vapour extractors: swelling of the membrane, moistening of the insulating layer causing a subsequent reduction or loss of original properties. The Air vents/vapour extractors are made from a flexible and UV stabilized PVC-P. They offer high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The Air vents/vapour extractors consist of a protruding body of various diameters directly attached to a smooth large flange. The air Vents/vapour extractors are designed and patented by ITALPROFILI® and are one of the most effective ventilation systems as they allow for the total evacuation of vapour build-up under the waterproofing layer.

    AIR VENTS/VAPOUR EXTRACTORS IN PVC-P

    147,00 €181,80 € (ex VAT)
    The AIR VENTS/VAPOUR EXTRACTORS IN PVC-P are particularly suitable for use with PVC-P waterproofing membranes. This particular item has been studied right down to its smallest details in fact, the unit has optimal characteristics that help eliminate serious and typical problems that can appear on a waterproofed roof caused by an imperfect evacuation of vapours, imperfect ventilation or use of incorrect air vents/vapour extractors: swelling of the membrane, moistening of the insulating layer causing a subsequent reduction or loss of original properties. The Air vents/vapour extractors are made from a flexible and UV stabilized PVC-P. They offer high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The Air vents/vapour extractors consist of a protruding body of various diameters directly attached to a smooth large flange. The air Vents/vapour extractors are designed and patented by ITALPROFILI® and are one of the most effective ventilation systems as they allow for the total evacuation of vapour build-up under the waterproofing layer.

  • ANTI-CONDENSE EXTRACTOR is suited for the ventilation of bathrooms, kitchens, wet rooms and any other rooms where there is a heavy presence of vapour. Thanks to the constructive characteristics it avoids the formation of condense and thus avoids dripping along ventilation pipes. They are available in colours grey or brown.

     

    The FLEXIBLE COLLAR IN PVC-P is suitable for connecting protruding pipes with synthetic waterproofing membranes in PVC-P. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The flexible collar is made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The flexible collar consist of a truncated body of variable diameters solidly attached to a large smooth surfaced flange.

    ANTI-CONDENSE EXTRACTOR, FLEXIBLE COLLAR IN PVC-P

    ANTI-CONDENSE EXTRACTOR is suited for the ventilation of bathrooms, kitchens, wet rooms and any other rooms where there is a heavy presence of vapour. Thanks to the constructive characteristics it avoids the formation of condense and thus avoids dripping along ventilation pipes. They are available in colours grey or brown.

     

    The FLEXIBLE COLLAR IN PVC-P is suitable for connecting protruding pipes with synthetic waterproofing membranes in PVC-P. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The flexible collar is made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The flexible collar consist of a truncated body of variable diameters solidly attached to a large smooth surfaced flange.

  • PIPE WRAP/FITTINGS IN PVC-P are suitable for connecting protruding pipes with synthetic waterproofing membranes in PVC-P. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional fittings available in the market. The pipe wrap/ fittings is made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The pipe wrap/fittings consist of a truncated body of variable diameters solidly attached to a large smooth surfaced flange.

    PIPE WRAP/FITTINGS IN PVC-P

    208,00 €258,00 € (ex VAT)
    PIPE WRAP/FITTINGS IN PVC-P are suitable for connecting protruding pipes with synthetic waterproofing membranes in PVC-P. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional fittings available in the market. The pipe wrap/ fittings is made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan. The pipe wrap/fittings consist of a truncated body of variable diameters solidly attached to a large smooth surfaced flange.

  • INTERNAL AND EXTERNAL CORNERS IN PVC-P are suitable for the reinforcement of the waterproofing in internal and external corners. The above elements should not be used as a substitute of the original waterproofing product, they have been created for a secondary protection and reinforcement of those areas of higher risk because of transversal and horizontal traction of the waterproofing membrane. They are used for application on roofs waterproofed with PVC-P membranes The Internal and external corners are made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan.

    INTERNAL AND EXTERNAL CORNERS IN PVC-P

    100,00 €120,00 € (ex VAT)
    INTERNAL AND EXTERNAL CORNERS IN PVC-P are suitable for the reinforcement of the waterproofing in internal and external corners. The above elements should not be used as a substitute of the original waterproofing product, they have been created for a secondary protection and reinforcement of those areas of higher risk because of transversal and horizontal traction of the waterproofing membrane. They are used for application on roofs waterproofed with PVC-P membranes The Internal and external corners are made of soft, flexible and UV stabilized PVC-P. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan.