• AIR VENT FOR PITCHED ROOFS are suitable for use on roofs having pitches between 8° and 50°. Suitable for use to aerate attic areas even using an extractor fan thanks to the large diameter of the pipe. The aereators, apart from the plate and pivoting body, can also be supplied with a bellows adaptor to fit any angle of pipe. The articles described above can be used on asphalt shingles, modified bitumen, fibrecement, natural slate, ceramic or sheet steel decks roofs. All the articles are made from IGOM.EE thermoplastic rubber having high mechanical and physical characteristics as well as good resistance to ageing and UV breakdown Ozone and other atmospheric and chemical agents. Thanks to the characteristics of the materials used the products can be used in working temperature ranges between -25°C and +100°C.

    AIR VENTS FOR PITCHED ROOFS

    102,96 €454,68 € (ex VAT)
    AIR VENT FOR PITCHED ROOFS are suitable for use on roofs having pitches between 8° and 50°. Suitable for use to aerate attic areas even using an extractor fan thanks to the large diameter of the pipe. The aereators, apart from the plate and pivoting body, can also be supplied with a bellows adaptor to fit any angle of pipe. The articles described above can be used on asphalt shingles, modified bitumen, fibrecement, natural slate, ceramic or sheet steel decks roofs. All the articles are made from IGOM.EE thermoplastic rubber having high mechanical and physical characteristics as well as good resistance to ageing and UV breakdown Ozone and other atmospheric and chemical agents. Thanks to the characteristics of the materials used the products can be used in working temperature ranges between -25°C and +100°C.

  • AIR VENT FOR PITCHED ROOFS Art. 157 and 157.1 for flat roofs or roofs having pitches between 0° and 50° are ideally suited for the aeration of cavity walls and roof structures and may be connected to pipes coming from beneath. All articles are made from IGOM.EE thermoplastic rubber and have high mechanical and physical characteristics as well as good resistance to ageing and UV breakdown Ozone and other atmospheric and chemical agents. Thanks to the characteristics of the materials used the products can be used in working temperature ranges between -25°C and +100°C.

    AIR VENTS FOR PITCHED ROOFS

    206,88 € (ex VAT)
    AIR VENT FOR PITCHED ROOFS Art. 157 and 157.1 for flat roofs or roofs having pitches between 0° and 50° are ideally suited for the aeration of cavity walls and roof structures and may be connected to pipes coming from beneath. All articles are made from IGOM.EE thermoplastic rubber and have high mechanical and physical characteristics as well as good resistance to ageing and UV breakdown Ozone and other atmospheric and chemical agents. Thanks to the characteristics of the materials used the products can be used in working temperature ranges between -25°C and +100°C.

  • AIR VENT FOR PITCHED ROOFS Art. 158 and Art. 158.1 are suitable for use on roofs having pitches between 15° and vertical. They are used as cavity aerators. They can accommodate pipes up to Ø 110 mm. Suitable for roofs waterproofed with bituminous shingles, modified bituminous sheet, fibre cement sheets, slates ceramic tiles or metal sheets. The air vent is made with IGOM.EE, a special compound of synthetic rubbers formulated by ITALPROFILI® which offer a high physical, properties that protect it againt degrade caused by UV, ozone or other atmospherical agents. It can be in a wide range of temperature from -25° to +100°C and remains stable in time. These materials guarantee perfect performance over the years.

    AIR VENTS FOR PITCHED ROOFS

    154,92 €189,72 € (ex VAT)
    AIR VENT FOR PITCHED ROOFS Art. 158 and Art. 158.1 are suitable for use on roofs having pitches between 15° and vertical. They are used as cavity aerators. They can accommodate pipes up to Ø 110 mm. Suitable for roofs waterproofed with bituminous shingles, modified bituminous sheet, fibre cement sheets, slates ceramic tiles or metal sheets. The air vent is made with IGOM.EE, a special compound of synthetic rubbers formulated by ITALPROFILI® which offer a high physical, properties that protect it againt degrade caused by UV, ozone or other atmospherical agents. It can be in a wide range of temperature from -25° to +100°C and remains stable in time. These materials guarantee perfect performance over the years.

  • ANTI-CONDENSE EXTRACTOR Art. 54 – 55 – 56 – 57  is suited for bathrooms, kitchens, wet rooms any other area where there is a heavy presence of vapour. Because of constructive characteristics it avoids the formation of condense and thus avoids dripping along ventilation pipes. They have been designed to cover protruding pipes and can also be used on slopped roofs with traditional tiles together with Art. 60. They are available in colours grey or brown.

     

    CAP FOR ROOF TILES suitable for connecting protruding pipes on traditional tiled roofs.

    ANTI-CONDENSE EXTRACTOR AIR VENTS

    ANTI-CONDENSE EXTRACTOR Art. 54 – 55 – 56 – 57  is suited for bathrooms, kitchens, wet rooms any other area where there is a heavy presence of vapour. Because of constructive characteristics it avoids the formation of condense and thus avoids dripping along ventilation pipes. They have been designed to cover protruding pipes and can also be used on slopped roofs with traditional tiles together with Art. 60. They are available in colours grey or brown.

     

    CAP FOR ROOF TILES suitable for connecting protruding pipes on traditional tiled roofs.

  • The VENTILATED RIDGE ELEMENT has been carefully developed for the aeration of cavity in cold roofs where bituminous shingles or fibre cement sheeting is used. The ridge can be used on any pitch thanks to the labyrinth design which prevents the back flow of water by even the strongest of winds. It is also easily aligned thanks to a specially designed hook system it has a built in insect net holes are pre-moulded into the ridge elements which are supplied with end closure caps. The ridge is made of moulded thermoplastic which is flexible and resistant at both high and low temperatures.

    VENTILATED RIDGE ELEMENT

    1,01 €119,50 € (ex VAT)
    The VENTILATED RIDGE ELEMENT has been carefully developed for the aeration of cavity in cold roofs where bituminous shingles or fibre cement sheeting is used. The ridge can be used on any pitch thanks to the labyrinth design which prevents the back flow of water by even the strongest of winds. It is also easily aligned thanks to a specially designed hook system it has a built in insect net holes are pre-moulded into the ridge elements which are supplied with end closure caps. The ridge is made of moulded thermoplastic which is flexible and resistant at both high and low temperatures.