Roofing accessorioes and technology
 
    ROOF DRAIN  

Download pdf of the page for print it


ANGLED ROOF DRAIN OUTLET IN IGOM EE
 

Art. 45.1

Art. 45
 

Art. 118.5

Art.117

Angled Roof Drain art. 45: the main characteristics of the angled roof drain is the possibility to be used for both inside and outside drains, for horizontal drains with free waterfall, terraces, industrial shelds, flat roofs, and roofs with vertical walls 90° angled, covered with bitumen, tarred felt or polymeric bitumen, APP SBS.
NOTE: Article 45.1 is also produced in stabilized PVC Art. 45.1, in PP Polyolefin (TPO) Art. 45.10, for application with synthetic waterproofing systems. Installation should be carried out at 3° slope.
INSTALLATION METHOD 1
 INSTALLATION METHOD 2

Angle drain unit in IGOM EE art. 117 is suitable for free draining balconies or landings as its wide flange allows good anchorage to either APP or SBS modified membranes using liquid membrane.
Art. 118.5 front piece allows ample flow of water and gives a perfect finish and acts as a support for the skirting. The various elements supplied with the unit allow the selection of the correct thickness is
various applications.
INSTALLATION METHOD



Art. 46 Curve ø 80
Art. 47 Curve ø 100
Art. 44.1 Leaf grate
SCUPPERS FOR BALCONIES IN P.P.


Art. 302

Art. 303

“Free fall” discharge pipes for balconies or landings art. 302-303 are made from either white or grey thermoplastic materials which have high impact and atmospheric agent resistance. They are suitable for
jointing to bituminous membranes with liquid membranes such as Mapelastic, or similar, and are therefore readily fastened in place, thus avoiding cracking around the joints with the waterproofing materials.


 ITALPROFILI s.r.l.
 Via Enrico Fermi, 2, 30020
 Torre Di Mosto (Venezia) Italy
 Tel. +39.0421.312059
 Fax. +39.0421.314586		    
||||
Project by Nextitalia.it Webmaster: milo@nextitalia.it