INSTALLATION
Art. 141 - 142 - 144 - 145 (143 - 146)
1 - Prepare a suitable hole where the drain unit is to be installed.
2 - Place the drain in position and connect it to the discharge pipe.
3 - Install the waterproofing membrane.
4 - Use a trowel to spread the liquid APP or SBS from the membrane until the ridges of the flange are completely covered.
5 - Position pipe Art. 146 and grille Art. 143 and proceed with finishing around the drain.

N.B.: Avoid installing drains in areas likely to freeze.

SPECIFICATION
Art. 141 - 142 - 144 - 145 (143 - 146)
Supply and install ITALPROFILI drain unit(s) with side discharge and/or with siphon to be inserted into pipe having a diameter of 50 or 75 mm. with seal ring.
BACK