LAYING TECHNOLOGY
Art. 49.3 - 49.5 - 50 - 50.3
Presuming that the vapour barrier has been previously installed the aereators are positioned on the highest points of the roof.
The insulation materials are then installed around the central body as per drawing A for a vent pipe or B for an aereator. The waterproofing membrane is then cut and installed around the vertical pipe. The aereator itself is then welded using a hot air gun on top of the membrane itself.

SPECIFICATION Art. 50 - 50.3
Supply and install ITALPROFILI aereators between vapour barrier and PVC, TPO or PP polyolefin waterproofing by hot air welding on top of the membrane.

SPECIFICATION Art. 49.3 - 49.5
Supply and install ITALPROFILI aereators for the ventilation of kitchen and bathroom areas to be fitted to existing outlet pipes.
Consisting of a cylindrical aereator suitable for use with Ø 10-100 mm. pipes, having a height of 325 mm. complete with a push-fit cap and insect barrier with flange for welding to PVC - TPO or PP
polyolefin waterproofing by hot air welding on top of the membrane.
BACK