special JOIST FH with
fixed head

RAISED FLOORS WITH JOIST SUPPORT STRUCTURE

ADJUSTABLE SUPPORT SYSTEM

Art. 185JFH 40 ÷ 56 mm
Art. 185.1JFH 50 ÷ 70 mm
Art. 185.2JFH 70 ÷ 110 mm
Art. 185.3JFH 110 ÷ 160 mm
Art. 185.4JFH 150 ÷ 210 mm
Art. 185.5JFH 200 ÷ 300 mm
Art. 185.6JFH 300 ÷ 400 mm
Art. 185.7JFH 400 ÷ 500 mm
Art. 185.8JFH 500 ÷ 600 mm
Art. 185.9JFH 600 ÷ 700 mm
Art. 185.10JFH 700 ÷ 800 mm
Art. 185.11JFH 800 ÷ 900 mm
Art. 185.12JFH 900 ÷ 1.000 mm

icona-pdf

fixed head

The Special Joist fixed head for decking floors with joist support structure has been specifically designed to allow the installation of joists from 40 to 100 mm. The innovative system allows to keep the joist always centered in the head, distributing the load evenly. The joist is fixed sideways in the appropriate holes with self-tapping screws.

OPTIONAL ITEMS

ART. 186.4

ART. 186.4

SLEEVE EXTENSION

The SLEEVE EXTENSION is applicable only on Art. 185.4JFH and allows to reach heights up to 1 metre and above, maintaining a final adjustment range of 100mm.

ART. 186.6

ART. 186.6

REGULATING KEY

Regulating key l. 500 mm., usable before the joist installation.

ART. 186.5

ART. 186.5

LEVELLING SPACER

The LEVELLING SPACER (1,5 – 5 mm) can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. And can also be used to increase the final height with 5 mm.